: 





 Hilti HIT-RE500 rubber anchorage 


 Without fear of poor environmental performance is always first Hilti RE-500 adhesive anchor is a structural reinforcement anchorage fastening applications with heavy loads the best choice. A large number of domestic and foreign test reports and certification, combined with a wealth of key engineering applications according to the matter out to prove that RE-500 to install from harsh environments, and the anchoring effect as secure as the embedded structure, after the anchoring process is called the highest standards (state-of-the-art) 


 Substrate concrete / natural hard stone 
 Appearance of the original soft foil packaging system for injection 
 Bisphenol A resin modified material (BisphenolAEpoxyResin) 
 Curing temperature -5-40 (℃) 
 Shear strength 7.9KN-77.8KN (MPa) 
 Packing 500ml, 1400ml 


 Use concrete anchorage reinforcement, especially important, cantilevered structures, the role of dynamic load-bearing structure, components, etc.; heavy loads fixed, such as beams, machinery, equipment, etc.; harsh environment after chemical anchoring applications such as wet, Ming water, high and low temperature environment and smooth Kongzhong An equipment; particularly for use in large-diameter and depth (eg, lap) of the anchorage and fastening; any test report requires a lot of heavy load application 


 Features a strong and stable bond strength even distribution along the anchorage depth, anchoring effect as embedded structures; installation from harsh environments, the design strength values ??for wet hole and the hole can be completely smooth to play, diamond drilling without cutting hair treatment and can be installed under water in the Ming; wide temperature range, the installation is complete you can carry -50 ℃ to +80 ℃ ambient temperature; without expansion stress anchorage for small margins, small space installation; without styrene and ethylenediamine, no odor, non-toxic and health levels in line with actual requirements, curing can be used for drinking water after contact with equipment installation; original soft foil packaging, materials, less wear and tear; special double helix mixing nozzle, to ensure accurate mixing ratio, Professional construction and related tools to ensure that construction standards; national standard reinforced concrete structure design specification GB50367-2007 Class A certified plastic; long-term performance by China, the United States and France and other countries certification; fire-resistant design data is complete (according to ISO834, to F240 / 4 小时); roots and double-sided welding tested; advanced anchorage and anchor design software (EXBAR / PROFIS) and global engineering services 
 Use / storage environment requires, the adhesive itself can not be less than 5 ℃, after opening the adhesive to be used in 4 weeks; transport and storage temperature must be between 5 ℃ to 25 ℃, stored in a dry dark environment ; should be strictly in accordance with the provisions of the construction Hilti construction steps 


 Curing schedule 
 Substrate temperature curing time initial setting time 
 -5 (℃)